Jewelry Polishing Compounds Jewelry Rouge Polish Compound Jewelers Set 5 Dialux

Description

JEWELRY POLISHING COMPOUNDS ROUGE POLISH COMPOUND SET 5PCS
D
i
a
l
u
x
®
FRENCH
-
ROUGES
ASSORTMENT SET OF 5 BARS
POLISHING COMPOUNDS
1 EACH OF -
RED
/
BLUE
/ WHITE /
GREEN
/
YELLOW
DIALUX
®
Brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.
The Dialux polishing compounds are a high grade premium polishing line of compounds specifically formulated for Precious Metals in Jewelry Polishing
DIALUX
®
POLISHING AND FINISHING COMPOUNDS
Bar sizes: 4" x 1-1/8" x 1-1/8"
Bars are individually wrapped like Chocolates
Bar Weight: 110 Grams - 5 Oz.
.
·
RED
"ROUGE DE PARIS"
-
Used for super finishing yellow color metals, especially gold.
·
YELLOW
"JAUNE"
"
-
Used for Bright Shine on Brass - Copper - Bronze - Soft Metals - Non ferrous Metals
(
Note:  The Yellow Dialux Bar color is actually a BROWN tone, the name & label is Yellow)
·
BLUE "BLEU DE PARIS"
-
Used for High Shine on all metals
·
WHITE
"
BLANC
"
-
Used for Bright Polish on White Metals - Silver
·
GREEN "VERT"
-
Used for Polishing White Color metals
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
JETS Product # 1614-9023567
Made by Lippert/Unipol
SHIPPING: Via USPS MAIL   *
Domestic Shipping Via
PRIORITY MAIL
®
NOTE: Visit
JETSTOOLS
e
bay Store Listings, where you can see a variety of Polishing Compounds, Buffing Wheels and more
J
ewelers
E
quipments
T
ools
&
S
upplies
.
PFRE 111 int-1.8lz CKSP  M P
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve
.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches
.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge   with a buff rake
.
·
Segregate your buffs for various metals, Gold, Silver, Brass, try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake
.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process
.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal
.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.
Protect yourself, your fingers and hands, your face and eyes and use respirators. An Apron or Smock is not a bad idea.