Wenzel XO 55 CMM, 2012 - Renishaw PH10M, OpenDMIS-5 Software

Description

Wenzel XO 55 CMM, 2012 - Renishaw PH10M, OpenDMIS-5 Software
Wenzel XO 55 CMM, 2012 - Renishaw PH10M, OpenDMIS-5 Software
We are pleased to offer the following for your consideration:
Machine Type:
Inspection - Support
Make:
Wenzel
Model:
XO
Year:
2012
SPECIFICATIONS
OpenDMIS-5 software.
Renishaw PH10M
Measurement Ranges, Weights
X-Axis Measurement Range: 500mm
Y-Axis Measurement Range: 40"/1000mm.
Z-Axis Measurement Range: 500mm
Useable Table Surface: 750mm x 1200mm, 750mm x 1400mm or 750mm x 1700mm,
Machine Weight: 980 kg, 1140 kg or 1260 kg
Permissible Part Weight: 200 kg or 300 kg
General Requirements
Electric: Single-phase AC, 1 P+N+PE, 115/230 V ± 10 %, 50/60 Hz, max. 1000 VA, ace. to EN 60204/1
Compressed Air: Supply pressure 6-10 bar, pre-filtered, quality according to ISO 8573-1 : Class 4 or better
Air Consumption: Min. 70 NI/min, higher consumption possible, depending on application (pneumatic dampers)
Measuring Accuracy
Measurement System: Photoelectric scale system, Optical division 20 µm
Resolution: 0.1 µm
Probing Uncertainty (TP200 Head): 1.8 µm
Probing Uncertainty (SP25 Head): 1.6 µm
Volumetric Length Measuring Uncertainty (TP200 Head): 1.8 µm + L/350
Volumetric Length Measuring Uncertainty (SP25 Head): 1.6 µm + L/350
Volumetric Scanning Probing Uncertainty (SP25 Head): 2.2 µm
Total Measuring Time for THP: 68 seconds
Operating Environment
Operating Temperature: 15-30ºC
Temperature Range for MPEE: 18-22ºC
Relative Humidity: 40-70%
Dynamics
Joystick Operation: 0-20 mm/s (Creep Mode), 0-100 (Normal)
CNC-Mode Vmax: 300 mm/s (Axial), 520 mm/s (Volumetric)
CNC-Mode Amax: 1200 mm/s2 (Axis-Related), 2000 mm/s2 (Volumetric)
Overall Dimensions
Width: 1135mm
Length: 1390mm, 1590mm or 1920mm
Height: 2505 mm
All specifications are assumed to be correct but must be confirmed by buyer.
Due to eBay's policy we do not have our contact information listed. The only way we can communicate with you is through the
Buy It Now
button.
Revelation Machinery encourages first-hand inspection of all used machinery.This machine is being sold "AS IS, WHERE IS" This is a used machine that is UNDER POWER and Available for Inspection. Please verify all of the specs listed for this machine. The Seller does not guarantee or warranty expressed or implied these specs to be accurate. It is the buyer's responsibility to confirm all specs and to make sure that this machine is the right machine for them. List prices are not inclusive of rigging or shipping charges.
Listing and template services provided by inkFrog